Transportation

When transporting glazed or unglazed frames, they should be firmly secured in an upright position on clean resilient packing. This will help prevent scratching of the surface of the profile. Frames stored on site should be treated in the same way and should be carried securely and placed in position without heavy impact. PVCu has a high resistance to weather, corrosion, and most materials found on building sites. However, as PVCu frames are delivered to the installer in a “completely finished” condition, care taken in transport, storage and handling will prove beneficial, thus ensuring a good installed appearance and customer satisfaction.

The protective tape on the PVCU frame(s) should be removed on completion of the installation, prior to final cleaning.

Protection

CEMENT, PLASTER AND SAND will not effect the properties of PVCu and may be easily cleaned from the surface - though care should be taken to avoid scratching. They may block drainage channels and so these should be checked and cleaned carefully before handover. Cement and plaster will corrode and spoil the action of gear and fittings so they should be cleaned off immediately

TAR AND BITUMEN may stain the surface of white PVCu and contact should be avoided during storage and installati

SILICONE SEALANTS generally will have no effect on PVCu and may be used with confidence. However, mastic and sealant systems which include solvent based primers must not be used. If you are in doubt, consult the sealant sup

Please note: The information on this page is for guidance only, and Glass Tec Windows are not liable for any damages or claims.